Buy one or I could make one myself out of a couple of layers of 1/2 inch thick plywood. (Obviously it would have carpet on it).
By the way it needs to carry 5 spars, have some way of tieing them to the carrier and would be useful to have some way of tieing the spar carrier to the trailer.
Buy one or I could make one myself out of a couple of layers of 1/2 inch thick plywood. (Obviously it would have carpet on it).
By the way it needs to carry 5 spars, have some way of tieing them to the carrier and would be useful to have some way of tieing the spar carrier to the trailer.
When I'm using a single trailer my sails go in a tube beside the boat and parallel to the A frame. And when I'm double trailing (laser on top and national 12 on the bottom) the sails all fit in the national 12 nicely because there is a lot of space inside.
So on my 5 spar carrier I will have Top Section, Boom, Bottom section for 4.7, radial and full rig.
It's a two boat adapter that looks similar to something Nautical America was selling a few years ago (may be the same thing). I believe it had cutouts for SEVEN spars - two complete sets for each boat plus an extra upper.
Similar to lasernut. My spars are attached by a piece of rope using the toe strap and side cleats. This way I carry 2 top sections, 2 bottom sections and a boom with no problems.
I also usually have 2 sails on the boat but they get attached separately as don't want anything too tight around them to damage the sail.
You really don't need a spar carrier system on the laser - the ones I have seen have actually caused damage to the hull when attachments have come loose and the blocks have rubbed during travel.
It's a two boat adapter that looks similar to something Nautical America was selling a few years ago (may be the same thing). I believe it had cutouts for SEVEN spars - two complete sets for each boat plus an extra upper.
Similar here. Just carried a Tasar on top on my Laser with the spars lashed to the dolly, Seattle to Vancouver. Did I mention that the tow vehicle was a Mazda MX-5 (Miata)