Palmbeacher
New Member
I purchased a hull that was patched in a few spots and therefore the white hull has been sanded down and is brown in these spots. This is strictly a recreational boat however I would like for it to be the same color. I have been looking on the net for info and really don't want to go the awlgrip or gelcoat route. There is too much color difference to just prime the areas and paint. I want to redo from the rub rail on down. Is there anyone out there that has heard or tried to sand the bottom with a specific grit, then primed, then painted. If so, could you suggest the best primer and paint combination so I could have a presentable boat? Many thanks for any suggestions and comments.