203
Very Senior Member
Here's some pictures of my cheap trailer. It uses a standard $250 Northern Tools trailer and modifications to make it Laser friendly. Material is a 10' piece of treated deck wood ( 5.5" wide, about an inch thick ) two 8" angles from the hardware store, two carpet scraps and a handful of nuts and bolts.
The main support is 50.25" across the back and 51.25" across the front. The actual vertical support is 13.5" long, and the outside 'decorative' support is 10.25. Assemble the support, put it on the trailer temporarily and let your boat tell you where it needs to be bolted down.
The front wheel does not come with the trailer either.. it's a normal swivel castor, added primarily because I'm lazy.
I picked the boat up for the pictures, but the clearance picture is with it sitting on it's gunwales, in a proper Laser trailer configuration.
KT, the dolly is coming soon (c:
Side View
Support View
Inner Support View
Bow Support
Bow Wheel
Support secured to the trailer
Clearance View
The main support is 50.25" across the back and 51.25" across the front. The actual vertical support is 13.5" long, and the outside 'decorative' support is 10.25. Assemble the support, put it on the trailer temporarily and let your boat tell you where it needs to be bolted down.
The front wheel does not come with the trailer either.. it's a normal swivel castor, added primarily because I'm lazy.
I picked the boat up for the pictures, but the clearance picture is with it sitting on it's gunwales, in a proper Laser trailer configuration.
KT, the dolly is coming soon (c:
Side View
Support View
Inner Support View
Bow Support
Bow Wheel
Support secured to the trailer
Clearance View