advice on polishing and wax

I recently bought a used laser from 2019 and it has a few minor scratches and the normal wear and I was wondering what to use and how to wax and polish it… I’m a little skeptical about ruining the gel goat. Any advice on what to do and what not to do and what to use.
Screenshot 2023-03-17 213253.png
clean off the old wax and dirt first by hand using a strong soap or even acetone alone may be enought , if your not experianced with a powered polishing/buffing tool you may rub through the gelcoat.
as its a fairly new boat you probably dont need to use a rubbng compound to reflat and polish the gelcoat and go straight to re-waxing