Its also a good idea to reduce the fore aft depth of the triangle. This reduces the load required at the cleat to achieve a given tension in the traveler portion. I use a height of triangle somewhere between 100 to 150mm. I use either 3.5 or 6mm Excel D12 with no slippage problems..
Hi all,
My problem is that when going upwind, the traveler block won't stay in the corner. I use core dyneema for the traveler, and it's as tight as possible. Should I change it to Vectran line or something else? Dyneema should normally work as it doesn't stretch..
Thanks for your help