My first Sunfish and my first Sunfish project

sblg43

New Member
100_5427.JPG100_5428.JPG100_5442.JPG100_5443.JPG100_5444.JPG

This Sunfish was given to me along with the trailer. The guy that gave it to me wanted to make sure that I saw the damage underneath before I took it. It looks as if it was pulled up onto a rocky shoreline. A lot of damage to the hull.

It was stored indoors for many years and is dry inside. I weighed it on my bathroom scale and it weighed in at 121 pounds.

More pics to follow.
 
In these photos, I am in the process of hull repair and painting. I know that some purists will never paint the hull of a Sunfish but.....

I used two coats of Interlux Pre Kote primer from West Marine. My top coat is Seagloss White from West Marine. I have one more coat of Seagloss to add.
 

Attachments

  • GOPR0206 (768x1024).jpg
    GOPR0206 (768x1024).jpg
    672.5 KB · Views: 98
  • GOPR0208 (1024x768).jpg
    GOPR0208 (1024x768).jpg
    707.7 KB · Views: 96
  • GOPR0214 (768x1024).jpg
    GOPR0214 (768x1024).jpg
    771.4 KB · Views: 103
  • GOPR0215 (768x1024).jpg
    GOPR0215 (768x1024).jpg
    731.1 KB · Views: 98
  • GOPR0217 (768x1024).jpg
    GOPR0217 (768x1024).jpg
    792.1 KB · Views: 95
  • GOPR0220 (768x1024).jpg
    GOPR0220 (768x1024).jpg
    679.3 KB · Views: 109
  • GOPR0221 (768x1024).jpg
    GOPR0221 (768x1024).jpg
    816.8 KB · Views: 112
  • GOPR0222 (768x1024).jpg
    GOPR0222 (768x1024).jpg
    718.5 KB · Views: 109
  • GOPR0223 (1024x768).jpg
    GOPR0223 (1024x768).jpg
    664.2 KB · Views: 97
  • Like
Reactions: tag
Thank you. I just finished with the second coat of Seagloss. Looking forward to flipping it upright and cleaning up the topside. No damage there, just needs a good cleaning and polishing.

Some new hardware is going to be added as well. I am planning to have a setup like Tag at the my2fish blog. Thanks Tag.
 
  • Like
Reactions: tag

Back
Top