[email protected]
Member
The current rules don't include dimensional info to locate the daggerboard stopper. I'm thinking that mine (an '02) may be off as the board doesn't fit properly into the receptacle on a LockPit. The culprit is the stopper - it's not where the hole is in the LockPit. Is there any archived info on the proper location for the stopper?
BTW, this boat had another dimensional issue - the holes for the factory daggerboard brake were useless for the new & improved version. I had to fill the originals and drill new holes about 8mm forward.
Thanks all!
BTW, this boat had another dimensional issue - the holes for the factory daggerboard brake were useless for the new & improved version. I had to fill the originals and drill new holes about 8mm forward.
Thanks all!