broken foil, center board

[brlaser]

Greetings from Baton Rouge, upon inspection of the boat after the second sail: I noticed a hairline crack on the top of the center board, front to back, just lacking about two inches from finishing it out. I have a general idea on the repairs. Any help out there ??? I know this has happened before. Later BRLASER

 

[brlaser]

upon inspection following the second excursion Monday, I noticed a crack on the foil. Its about two inches down and lacking about the same from finishing itself out on the back side. I have a general idea on repairs ????? BRLASER /

LIVE SLOW AND SAIL FAST

 

[49208]

Pic might help get better answers, but check this thread. http://www.laserforum.org/showthread.php?t=4678
Gouv's method sounds like it would be the ticket for a small 2" crack

Is the crack running up and down the board or across (from leading edge to trailing edge) ?

 

[brlaser]

The crack starts on the leading edge about two inches from the top. It then goes even with the top to about three inches shy of the trailing edge. I looked at the link. The board won't be submerged ??