woodbark
Member
I decided at the end of last summer that it was time to utilize the space in the bow area of my Mod 2. I really was not prepared for what I would find.
The Cuddy box was a lot easier to remove than I expected, after removing the screws around the flange, I used a chisel as a pry bar and gently pried, a little bit at a time between the Cuddy flange and deck face and it slowly started to separate. Eventually it popped apart, then it was just a matter of hauling it out of there!
It's actually quite huge or deep as you can see from the photo! I am penciling in a cut off mark around it as I will be reusing the front surround/flange to re-trim the opening.
If you always wanted to see what was inside, behind that Cuddy Stowage! ..... well here it is!
The Cuddy box was a lot easier to remove than I expected, after removing the screws around the flange, I used a chisel as a pry bar and gently pried, a little bit at a time between the Cuddy flange and deck face and it slowly started to separate. Eventually it popped apart, then it was just a matter of hauling it out of there!
It's actually quite huge or deep as you can see from the photo! I am penciling in a cut off mark around it as I will be reusing the front surround/flange to re-trim the opening.
If you always wanted to see what was inside, behind that Cuddy Stowage! ..... well here it is!