I've got a very long aluminum enclosed car carrier that has a "totally" rubber suspension for each of its two axles (plus electric brakes). The rubber suspension has held up well, although I'll expect some hardening over time.Is there anything about the rubber suspension that I should know about?
Why does one of the two diagonal braces appear misaligned?
I would replace the factory issued tail/brake/directional lights with aftermarket LED lights from NAPA.
Not sure what you mean with this; when I look at it, it'll probably make sense, hopefully.check the axle/tongue angle to make sure it is 90 degrees perpendicular
VIN 1XTXB1515B1000248
I could an education on deciphering these numbers.