Sunfish Lettering and Logo (NEW)

[mw1670]

I've attached files of the Sunfish logo and lettering that is placed on the sides of boat. If you need to replace what is on your boat, you can take these files to places with signmaking equipment who can cut you out a new set of adhesive vinyl. I've taken these files to a place near me, and for about $20 I was able to get a set in a bunch of different colors. All I had to do is pull off the adhesive protection sheet, stick it down, and use a squeegee to make sure there weren't any bubbles. Piece of cake. These files can also
be used for any other purpose you might need the name and logo (like printing), but they're in black - so you'll need to change the color if you want something different.

 

[Wavedancer]

Thanks!
Your digital craftsmanship will be appreciated by many .

 

[B-L Bandit]

I was lucky enough to be at vanguard/laser performance about a week ago picking up some new boats for work and one of the sunfish's was missing the side logo's. I asked one of the guys their and was able to get some for the boat and a couple extra for myself. Not bad.