you just drop them in....
Well then which one do you drop in first numbnuts? Since there are two, shouldn't one be fastened to the mast and the other to the step?
Well then which one do you drop in first numbnuts? ---snip---
Nice attitude.
Good luck figuring this out on your own.
"Lightweight Carbo Disks protect the gelcoat at the mast step base from wear and provide the Wearite Disk with a smooth, flat mating surface for friction-free mast rotation. "
You're right, it is easier to find out on my own than asking on this forum. And the APS website didn't cry when I asked it for information.
Aren't we getting a little off-track here?
E.p.o.x.y.
I still want to know how to glue the disk to the bottom of the mast.
Is it class legal to glue a disk to the bottom of the mast...I DON"T THINK SO.....Class rules say 1 disk....
Part 3, Rule 19(a) . . . a disc of uniform thickness not exceeding 1mm in thickness may be placed in the bottom of the mast step.
As the preamble says, "If Part Three does not specifically allow a change or addition - it is illegal." Sounds like one disc only then.