powergroove
Member
every line so far has slipped. The cleat doesnt look so bad, what is the preferred line that you guys like. Secondly, does anyone play with this line, or is it kept tight?
Thanks again!
Thanks again!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Its also a good idea to reduce the fore aft depth of the triangle. This reduces the load required at the cleat to achieve a given tension in the traveler portion. I use a height of triangle somewhere between 100 to 150mm. I use either 3.5 or 6mm Excel D12 with no slippage problems..
Hi all,
My problem is that when going upwind, the traveler block won't stay in the corner. I use core dyneema for the traveler, and it's as tight as possible. Should I change it to Vectran line or something else? Dyneema should normally work as it doesn't stretch..
Thanks for your help