Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I have several complete sets of aluminum Sunfish deck/hull for $45 a set. Simply remove your existing trim (a 15 minute job) and pop rivet on a "new" set (1/2 hour job.) Trying to bend a straight piece to a curve is very difficult if you don't have all the specialized tools. I am less than two hours from you.Looking for tips for sunfish aluminum gunnel replacement, specifically the bow.
Thanks so much for the insight. Withe your response and a couple others, I have a selection of good alternatives. I only wish I'd used the forum earlier and prior to buying a straight replacement piece and now am under the gun to fininsh it for my grandkids to use this summer.I did a write up on this forum of how I did it and it turned out great search for
Installing aluminum rub rail around the corners on a Sunfish...
Great alternative, thaks for the insight. I've lrreday bought a new straight piece, but we have a couple Sunfish, so it's pretty likely I'll have the need again and will certainly keep your alternative in mind,I have several complete sets of aluminum Sunfish deck/hull for $45 a set. Simply remove your existing trim (a 15 minute job) and pop rivet on a "new" set (1/2 hour job.) Trying to bend a straight piece to a curve is very difficult if you don't have all the specialized tools. I am less than two hours from you.
E-mail me at : [email protected] if you are interested.
Alan Glos
Cazenovia, NY