Capt. Rav
New Member
My Omega 14 (Hull 1143) has some severe stress cracking along the deep parts of the seats. Is there a way to separate the inner and outer hulls of the Omega 14 so I can freely access the backside of all the fiberglass along the benches and hull? I haven't yet looked in the centerboard box to see how the two parts connect in the center.
My current thought is to separate along the backside of the rub rail, find some place to separate around the centerboard, and simply lift the deck away from the hull. Not knowing what the structure is like inside the cavity, this may or may not be sufficient.
My current thought is to separate along the backside of the rub rail, find some place to separate around the centerboard, and simply lift the deck away from the hull. Not knowing what the structure is like inside the cavity, this may or may not be sufficient.