Rigging a jib downhaul for solo sailing

Discussion in 'Capri/Catalina 14 Talk' started by Movingmen1, Aug 11, 2014.

  1. Movingmen1

    Movingmen1 New Member

    Likes Received:
    3
    Trophy Points:
    3
    I like to solo sail and have a question about getting the jib down in a stiff wind/bad weather/docking. Has anyone rigged a jib downhaul running a small diameter line from the cockpit to a swivel block at the bow and then attach it to the top hank or the head of the jib? Hoist the jib halyard as you normally would and tie it off, then cleat off the small diameter line in the cockpit. To bring it down release the jib halyard pull from the line in the cockpit? I know the self furling jib would be the best answer, just wondered if anyone had done this. Don't want to spend $400+ getting the jib done and buying the self furling system.
     
  2. kdub

    kdub Member

    Likes Received:
    3
    Trophy Points:
    8
    YES! I did this last summer and it works great. It is nice to be able to tie down the jib when not in use for short periods of time, just center both sheets and cleat the downhaul. I will try to get you a few pics of how I rigged mine later this week.
     
  3. Movingmen1

    Movingmen1 New Member

    Likes Received:
    3
    Trophy Points:
    3
    Thank you, I look forward to seeing the pictures.
     
  4. Flyer

    Flyer New Member

    Likes Received:
    0
    Trophy Points:
    1
    Any chance you can post some pic to see how you rigged the device? Thanks
     
  5. kdub

    kdub Member

    Likes Received:
    3
    Trophy Points:
    8
    I thought about doing a block with a spring to keep it inverted but I found this shackle was simpler and easier. I put the tack of the jib through the pin part and then I run the line down through the shackle loop. I just let me line go across the top of the bow and tuck it in my cup holder or cockpit organizer.
    Sorry about delay getting pics. I will send you another set of it rigged with procedure when I get a chance, it is simple though, and does work nicely.
     

    Attached Files:

  6. Movingmen1

    Movingmen1 New Member

    Likes Received:
    3
    Trophy Points:
    3
    Did you put on larger jib hanks to get the downhaul line through them? If so, what size did you use? Thanks for your help.
     

Share This Page