Mast Step Repairs.

Discussion in 'Laser Talk' started by Goonie, Dec 14, 2002.

  1. Goonie

    Goonie Guest

    Anybody have any good advice? Mac Im looking to you!
     
  2. phantomdarkness

    phantomdarkness New Member

    Likes Received:
    0
    Trophy Points:
    0
    umm, i personally have never had this problem, nor heard of it, so don't look at me :)
     
  3. macwas16

    macwas16 New Member

    Likes Received:
    1
    Trophy Points:
    0
    I Know that at some places you could get a mast step repair kit but I have heard they are fairly expensive. If there is a crack on the inside or it is leaking, applying some epoxy and sanding it smooth should do the trick. Another thing to try is cutting an inspection port right near it (pefferably right in front) so you can take a look around it from the inside of the boat. This will give you a range of options to work with. But you shouldn't go spending a lot of money on a new step repair kit if you don't need that. As a teenager thats short on cash like myself, sometimes you have to rely on your resourcefulness and you could always check out drlaser's FAQ section for help.
    Good luck!
     
  4. will162878

    will162878 New Member

    Likes Received:
    0
    Trophy Points:
    0
    drLaser combined with your local laser dealer/fibreglass company/boat yard should ensure a good repair....
     

Share This Page