Throughout this summer I've been getting some water coming out the drainplug after the boat has been in the water for a few days. It seemed that there was more water after weekends when it rained, therefore I had a sneaking suspicion that the deck fittings were leaking. I have a mod 2 and after a few hours of horrible work I was able to get the storage insert out and check out the front of the boat. It was indeed wet in there and the plywood reinforcement was wet. Not good. I had just sprayed the boat down and it does appear that water is coming in through just about every screw hole in the deck. What is the proper way to rebed these things so that they don't leak? I'm most concerned about taking them out and losing strength in the screws. Do you need to epoxy the holes and re drill?