There is a crack in the gelcoat in the bottom keel downt he center of the hull on either side of the daggerboard slot. It runs from front to back. well the boat has been moved to a couple of sawhorses in my back yard and I am drying it out. Well I noticed a wet spot on the ground and looked up and noticed that the one part of the crack was dripping. So I wiped the drip. I took a long time for the water to cause another drip about 5 minutes. I know there is probabbly about a inch of water in the bottom of this boat. Is it possible that the water is seeping through the fiberglass? Or is the fiberglass damaged/cracked? I'm going to re-gelcoat the boat in the next week or two I guess ill grind the gelcoat down in that area so I can repair the crack. Ill probabbly cut a 5" port and see how the boat looks inside and apply some fiberglass. from the inside.