Hello all,
I'm planning on un-stepping the mast on my 1989 Beneteau Oceanis 350 to do some work on the masthead. Following are the considerations:
Questions:
I'm planning on un-stepping the mast on my 1989 Beneteau Oceanis 350 to do some work on the masthead. Following are the considerations:
- Mast height (horizontal length of the spar) = 40 ft.
- Mast weight (excluding standing rigging) = 350 Lbs. I'm using total of 400 Lbs of weight in my plan.
- Boat is in a slip and must remain in the slip
- Not using a crane or other boats (no buddies)
- Mast is deck-stepped without a hinge at the boot
Questions:
- Has anyone lowered a mast in this way (using an A-frame) on a boat this size?
- Has anyone done #1 and the mast was not hinged?
- Does anyone have any advice, based on experience (not opinion), whether or not my plan is feasible and if it is, any tips to ensure success.