I bought my first sunfish ( 82' )a couple of weeks ago and I know I need to dry out the inside foam. I don't have a garage so I have to do this outside. I have done a boat load ( pun intended ) of research on this and I know that I first have to decide if I do this with the hull up or hull down. It doesn't have any inspection ports yet but I expect I will need one in the deck at the stern and either/and a inspection port in the bow and one ahead of the dagger board well. I thought I would get one of those small muffin fans to push air in the stern inspection port.
If I do it with the hull facing up I was thinking of propping the bow up on a saw horse and the stern on a board on the ground to give it an up angle to help with air flow. I figure if I do this I might put a black plastic trash bag taped to the hull to warm up the hull and air inside to aid in the drying. Upside down I can leave the ports open rain or shine for several weeks. I know I need to put a screen on the inspection ports while they are open so that insects and critters can't find a fall home inside the boat.
If I do it with the deck facing up I was not sure if I should do it with the boat level or propped up on a saw horse under the bow. Muffin fan above the stern inspection port pushing air into the hull and possibly out the mid boat port or the bow port. I would also use a black plastic bag taped down to the deck to warm the boat and thus the inside air. The issue with this is I have to be careful if it rains that water doesn't collect in the cockpit and I remember to put the inspection port covers back on. The boat won't be in my yard but will be at a friends yard and she has agreed to put the inspection port covers on if I call and remind her.
Adding an inspection port in the stern seems a given. I don't know if I need both a mid boat inspection port and a bow inspection port or just one in mid boat for keeping an eye on the mast well and dagger board well. Will the mid boat port still draw air from around the bow to dry the foam in the front of the boat if there isn't a bow port? I don't mind 3 inspection ports if that is best but if I can get by with 2 that seems better. From what I read the stern and mid port should be 6" and the bow port 4". Right?
What say ye?
I anxiously await hearing what anyone has to suggest.
Thanks in advance
If I do it with the hull facing up I was thinking of propping the bow up on a saw horse and the stern on a board on the ground to give it an up angle to help with air flow. I figure if I do this I might put a black plastic trash bag taped to the hull to warm up the hull and air inside to aid in the drying. Upside down I can leave the ports open rain or shine for several weeks. I know I need to put a screen on the inspection ports while they are open so that insects and critters can't find a fall home inside the boat.
If I do it with the deck facing up I was not sure if I should do it with the boat level or propped up on a saw horse under the bow. Muffin fan above the stern inspection port pushing air into the hull and possibly out the mid boat port or the bow port. I would also use a black plastic bag taped down to the deck to warm the boat and thus the inside air. The issue with this is I have to be careful if it rains that water doesn't collect in the cockpit and I remember to put the inspection port covers back on. The boat won't be in my yard but will be at a friends yard and she has agreed to put the inspection port covers on if I call and remind her.
Adding an inspection port in the stern seems a given. I don't know if I need both a mid boat inspection port and a bow inspection port or just one in mid boat for keeping an eye on the mast well and dagger board well. Will the mid boat port still draw air from around the bow to dry the foam in the front of the boat if there isn't a bow port? I don't mind 3 inspection ports if that is best but if I can get by with 2 that seems better. From what I read the stern and mid port should be 6" and the bow port 4". Right?
What say ye?
I anxiously await hearing what anyone has to suggest.
Thanks in advance