joe c
banned
needs all of the rigging redone so couple of questions. just some quick measurements and the boom for the 2 and standard look to be abloutt the same length. so guessing the mainsheet length is the same or close enough? still need to step the mast and could measure but figure the brains here might have an answer. its a 1980. overall fair shape. transome is good. dagger sleeve looks ok. seams from stem to midship are blown out but thats an easy fix. framing for the step and starp eye is completely rotted and gone but im a woodworker with marine backround and have no issue fixing that. im getting a main halyard length of about 45 feet. what size dynema should i be getting for that? its got 6mm on it now but its nearly hard as a rock.
i couldnt believe when i found the water jugs in the hull. one had a hole in it from screws probable poking it. but ill replace the holed one and maybe even shove a few more in there, transome ar aft deck had holes poked from the mast sitting on it but got that parched and blended. needs non skid still but working on it. hoping to just get it out on the water for the season then thinking have the mast powder coated next off season. sails are in pretty decent shape.
great fun little bpats to work on. i
i couldnt believe when i found the water jugs in the hull. one had a hole in it from screws probable poking it. but ill replace the holed one and maybe even shove a few more in there, transome ar aft deck had holes poked from the mast sitting on it but got that parched and blended. needs non skid still but working on it. hoping to just get it out on the water for the season then thinking have the mast powder coated next off season. sails are in pretty decent shape.
great fun little bpats to work on. i
Last edited: