tobackpack
New Member
I recently purchased a 1974 sunfish with the old style three loop traveler. Both of the eyestraps have pulled through the deck. The prior owner tried to fill with a silicone gel. After clearing away the silicone, it is apparent that eyestraps must been leaking for a while due to the amount of delamination. I can't tell yet if there are any backing blocks attached which should have prevented the screws from pulling out.
Do you have any suggestions as to repair methods? I have done both fiberglass and gel coat repairs in the past on other boats. I am thinking of installing an inspection port but I am uncertain where to locate it in the stern. Several posts seem to suggest that 6-8" from the transom is the proper location. I don't want to damage the integrity of any supports in that section of the hull
Thanks
Do you have any suggestions as to repair methods? I have done both fiberglass and gel coat repairs in the past on other boats. I am thinking of installing an inspection port but I am uncertain where to locate it in the stern. Several posts seem to suggest that 6-8" from the transom is the proper location. I don't want to damage the integrity of any supports in that section of the hull
Thanks