I have a Mod 1 in the water that has developed a hull leak that I suspect is from the forward part of the hull. When I look inside the cuddy I see a joint where it appears the fiberglass folds up about an inch or two and is glued together starting about a foot forward of the cuddy entrance and extending back from there. The joint is delaminated and I think is where the water is leaking in. The leak is so slow, however, that I don't know for sure. Does anyone know why catalina puts that raised fold there, and is that part of a raised sole above the actual hull? If so, maybe the space between the sole and the hull has filled with water and is seeping out through the delamination.