Search results

  1. Amfab

    To Mast Cleat or Not To Mast Cleat…

    I put a cleat on my Minifish because there is no block before the deck cleat and they have a tendency to pull out with a lot of upward force. Once I did it I found it makes things so much easier that I put one on the Sunfish. One place it makes life easier is putting the sail up and down from...
  2. Amfab

    Daggerboard humming....kinda fixed

    A few weeks ago I was down in Baja and one of the days was pretty light so I took the air wedge with me and it worked perfectly. Because of the light winds, I had the daggerboard pulled up about a third of the way and the chop was causing the slight slop in the daggerboard to make it knock every...
  3. Amfab

    Daggerboard humming....kinda fixed

    I just bought this thing—just because I thought it was a neat thing to have. Its this little inflatable rubber bag: https://www.harborfreight.com/300-lb-air-wedge-and-leveling-tool-56899.html ... and as I was looking at it in the store I thought, "yah know... maybe I can keep it handy on the...
  4. Amfab

    Daggerboard question

    Totally looks like the same boat and sail. Actually I have this stripe scheme I have not seen before with two narrow yellow strips on either side of the wide red one. Most I have seen have all three stripes red. My FRP one does the low hum at higher speeds, I thought something was wrong.
  5. Amfab

    Daggerboard question

    Thanks Charlie, I am pretty sure its a Barrington on the Minifish. My Sunfish has a racing style fiberglass one with a stainless tip I put on to cover some damage, I think you saw that thread I did on that. The Minifish daggerboard has clearly been refinished or replaced by the previous owner as...
  6. Amfab

    Daggerboard question

    Hi Charlie, Both the boats and their respective centerboards are currently in Baja—unfortunately I am not. I try to do all the research and collect parts before I go down to sail as it is quite isolated down there with no place to buy anything except duct tape and beer. I was going to go down...
  7. Amfab

    Daggerboard question

    Oh, yeah, I was thinking about drilling a hole like Cactus was saying (and varnishing inside the hole,) but maybe the guy before me refinished the daggerboard (there is no way that the finish was original) and left off the eyes trap. Coincidentally, I just happened to order a couple extra eye...
  8. Amfab

    Daggerboard question

    The daggerboard in my Sunfish is an FRP racing style, but the daggerboard in my Minifish is the traditional mahogany type. I assume it is original. My questions is, inn't there supposed to be a hole to run a line though it to make it easier to pull out or to tie the shock cord to? I cannot see...
  9. Amfab

    Sentimental Sunfish story

    Fantastic story. I first sailed a Sunfish at 15 and didn't come back to it until I was 55. I can totally relate.
  10. Amfab

    Minfish Impressions vs. Sunfish.

    I THINK the spars are the same just shorter—and I think the goosenecks are the same—I hope so, I just ordered a quick adjust thingy for both of them. Like Seaotter said the mast is the same diameter. I will have to check and measure next time I am down in Mexico, which will be in a couple of...
  11. Amfab

    Minfish Impressions vs. Sunfish.

    I think the end of the serial number is the year Mine is ...77D which I think is 1977
  12. Amfab

    Mast cap position

    Man it is great down there. I only wish I could get down there more often. Right now its like four days every couple of months.
  13. Amfab

    Mast cap position

    I got the Idea from Tag. Some others mentioned that its a racer things to do. I went this route because the Minifish does not have a halyard fairlead or little block like the Sunfish and I heard that someone tore out their cleat from the deck of a Minifish because the halyard pulls straight up...
  14. Amfab

    Minfish Impressions vs. Sunfish.

    The MG analogy is great, better than mine—I was thinking more of a 914-6 vs 911S. In any event, the best solution is to have both.
  15. Amfab

    Minfish Impressions vs. Sunfish.

    The first time I sailed a Sunfish I was 15 on vacation in Jamaica with friends who had a house there. I had so much fun for two weeks I do not know why it took me almost exactly 40 years to buy one and get back to into it.
  16. Amfab

    Mast cap position

    Thus is the one, the part number was 60030 from West coast sailing.
  17. Amfab

    Mast cap position

    I am sorry it was typo, I meant clam cleat, sometimes called a jam cleat.
  18. Amfab

    Minfish Impressions vs. Sunfish.

    About 100 Miles South of San Felipe— here is a pict of the Sunfish
  19. Amfab

    Minfish Impressions vs. Sunfish.

    I just wanted to relay my experience with a Minifish I just bought because it is such a blast—and compare it to the Sunfish if anyone is interested. Both boats are mid-70s. The Minifish is incredibly easy to toss around, load on a car, throw on a trailer, and pull up on a beach—much easier...
  20. Amfab

    Mast cap position

    Cam Cleat. I put one on my Minifish and one on my Sunfish. I really like them. -Andrew

Back
Top