Thanks J24_Nancy. Mine has a bar that protrudes and I am not sure if it's a thru-bar but it does have an angle. The spreaders I took off had a bit of the back milled off so to get more angle. I got an angle guage for building and I will use that to try to drill holes.
After searching, I found our spreaders (2nd gen spreaders, foil shape) at Dwyer Mast PN DH2503C 30" for about $60 ea with shipping.
I have read as much as I can find about angles etc. but had some questions.
1) do people have and use spreader adjusters? Ours had them but the welding shop...
Nice job BFD. Good call on the Alum vs stainless as I went to put the stainless back on and holes were too tight so it got a little 4200 messy.
I just did the same job and fwiw, I found the Racelite gudgeons cheaper and the bolt holes lined up perfectly. The Racelite folks are great and...
I would add to the VinceH info that if you use spectra or an old halyard that is good quality for the gin pole shrouds, it keeps the whole rig stable. It gets precarious and your first time you'll be nervous but it works well. Also, tie a line to the loop under the spreaders that you use to...
I have used one before and they work surprisingly well. Not on a j24 though. Have to make sure the plug is good as you don't want it losing power if aren't paying attention for awhile.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.