Search results

I was capsized and a 420 hit my boat and put a pretty big sized hole in my hull right next to the auto-bailer. I would like to know if there is a special way to lay down the fiberglass so if the hull ever flexes it wont just cause cracks and eventually lead to another repair. Another question...

I like the bag sold by intensity sails, it has good protection and good ventilation.

When I did this I cleaned out the area where the deck separated and then put in West System Epoxy. It is only under and inside the boat so when your done, it looks like new.

There are 4 or 5 lasers that are all white at my club and look just like this one and most of them are from either 1990 or 1991

I was looking online and I saw a couple designs of land sailors that looked cool. The only thing is that they are all with windsurfer sails. Would it be possible to do it with a Laser Radial sail or would it be too powerful? Thanks!

My centerboard has been warped from years of heat and wetness from the previous owner. Is there any way to fix this?

you could buy a tripod mount or make one out of the packaging that the gopro came in and then get a stsinless bolt with a wing nut, cut off the head of the bolt, and glue it in the tripod. then drill a hole in the plastic near the bow and put the tripod with the bolt through and secure it with...

I would probably use wood. Should I just carve to to the right dimentions?

how would i go about making a tiller to fit in the rudder

I was thinking of making a tiller and extension for the laser over my week off. If you have any tips, ideas, or opinions they would be great. Thanks

Yea, I like the Extrasports, you can move around in them and they are comfortable, they are a little pricey but if you go on defender or whitecaps foul weather gear they are pretty cheap.

it looks like a laser and it should say on that sticker near the front of the traveler near the top of the cockpit.

How do you tell if a Laser has a soft spot? I know they make your boat slower but I don't know how to see if there are any and how can it be fixed, if it can be fixed?

go on intensity sails and get the 100 dollar its cheap and nice

hey vince

This happened to my brothers laser, we were sailing it and when we took it out of the water we couldn't pull it up the ramp their was so much water. I don't no if you have sailed it yet but you have to wait for it to dry and separate the deck and the hull as much as you can without making it...

If you don't want to spend the money on the tripod mount for the front mount you can just cut out the black packaging mount that the GoPro came in and then it becomes a mount. when you have done this you can cut out a piece of PVC board so it can fit inside of the packaging mount then drill a...

yea just use a wine cork until you order the rubber cork I use one all of the time on a 420 when I loose a rubber cork cork, they work fine and fill in until you buy one

Hi, Would mounting a GoPro on the tiller with the 3M tape work? I have seen a YouTube video like this and I like it.(http://www.youtube.com/user/gavalarslade#p/a/u/2/DP140NrP1Lo ) The only thing I am worried about is that I don't know if it would get caught up in the main sheet when I jibe...

Hi, What cover should I get for my laser, I have seen the Tyvek race covers for $50 at my boat club but they always end up ripping. is there an online store where I can go that has a stronger cover that is the same price? I have a tight budget only about $70 so if you know a place that sells a...