We had a bunch of used holt vangs around last week. I know we sold a bunch, but I think there were two or three left before the holiday.
We have a new ones in stock as well of course.
best bet is to find a local sailor or someone on uship/craiglist who can transport it for you carefully on a dedicated trailer.
If you need to ship it with a truck service, see if your local dealer has a new laser crate (cardboard) that they can lend you. Be very careful if you do this, as it...
always rig customers boats with it on the starboard side. Important to be able to reach in as you round the top market and easy it off.
Those couple inches are a couple inches of hiking as you are on lay-line and then hiking it to windward to bear off.
--
I have one or two customers that...
You'll definitely want to replace the fitting on the base of the top section. I imagine without it, the mast is very likely to bend/fail, as it will only be supported in one small spot on the collar instead of two places.
If possible, I'd try to get the cap out still. It sounds like you have...
They are both pretty similar. The Zhik vest has less buckles exposed (1 big one instead of 4 smaller ones on the Gill)
It makes the Zhik one a bit more 'sleek' if you will, but both are pretty low bulk and pliable to fit snug.
Turtled - Use a 3/16" x 1/4" deep rivet. Aluminum is fine on the mast plugs.
Note:
3/16" is width of the rivet head itself, not the post you pull on
1/4" is the depth of the body of the rivet itself.
Not to discourage you, but I spent a weekend one time, wet sanding and wet sanding. The boards were AMAZING. So smooth, so nice. I think I started at 400 grit and ended up at 1200 grit to see how nice they could become.
On the second day of racing with them, I hit some sand/pebbly ground by...
white, white and white, those are your choices :D
--
As others mentioned, the boats are all coming 'vela grey' which, is a very light grey that is quite nice at cutting down any glare. It looks quite white in the sun.
--
The last time we had a dash of color was summer 2008, the Youth Champs...
Unfortunately, not a real game :)
I visited Brendan (owner of SEA) in Australia a few weeks ago, and he had this on his wall.
He had a friend who worked at EA Sports who made it up for him.
You could also get a box from your local dealer (maybe double box it) and see if it can go on big truck.
Shouldn't be more than $700 or so like that. Expensive, but insured and reliable if you choose a big company.
There ARE some boats that can cause problems like you describe, but the laser generally isn't one.
Some catamarans, moth, and a few others will keep sailing away, or, while capsized and being very light, get pushed away.
If you're sailing in the sound, it is cold, so dress for the water, not...
We haven't gotten in a set, but lots of input from customers that they are looking forward to the new brake.
I think this will make the biggest impact on usability in a while. If all goes well, we might all be reminiscing about the crazy 'ol days when he had to kick our daggerboards down while...
I use the SEA Ultra Warm in a lot of conditions and I really like it. I think it's a pretty good bang for your buck at $115.
The Zhik super warm is a bit thicker and warmer, so they are slightly different.
Both have a water repellent outer shell which is really slick
The new daggerboard brakes are finally coming this fall.
LP should starting shipping them in October.
We already have them up for Pre-Order, as I'm sure your local dealer and forum sponsors will shortly.
Only picture so far of the finished product (I've only seen the prototypes in person)...
Unless there is an obstruction in there, they should just slide right together.
Most of us find there is TOO much space between then, so we put a little tape around the plastic fittings.
Make sure both masts are right in line with each other, hard to do it if one is at an angle.
But, yeah...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.