Search results

cflscorpion, what are you charging?:confused:

That's a good tip. Thanks! (I wish my sail looked as good as your's):(

What are you guys talking about, empty daggerboard wells? Do you not need the daggerboard when sailing strong winds? I'm new to all this, only been out 5 or 6 times, but I remember once when I was coming into shore to land I pulled the daggerboard up too soon and found I couldn't control the...

Would it be harmful to store my sunfish on it's side over the winter? :confused: I was thinking of putting a piece of carpeting down on the garage floor, and then rolling the boat up on it's side edge, and I'd hold it in place (against one of my garage walls, inside) with a strap or something...

I have a '73 Sunfish. Do you think my boat has the thick teakwood inserts?

Lulusail, Where in the midwest are you?

That's pretty Kool!:D

For such a small job, if I didn't already have epoxy on hand I'd probably just go and get one of those double tubes of epoxy and hardener you see in hardware stores, Wal-marts, Menards, etc. They look like two syringes stuck together side-by-side. You just cut the tips off and press the plungers...

Glassing means you are glueing fiberglass cloth to the wood. You'd roll some epoxy on the wood, then lay a piece of fiberglass cloth in the wet epoxy, and then roll more epoxy onto the glass, filling the weave. When the epoxy cures the fiberglass cloth is bonded to the wood. I was familiar with...

I fixed a crack in my rudder by 'glassing both sides of it. I used thin epoxy resin and squirted epoxy into the crack before glassing the sides. My crack ran from one of the bolt holes to the back of the rudder (probably only 2 or 3 inches long). The glass adds strength and helps hold the...

Whose Ritchie? :confused:;) I use U.S. Composites 635 thin epoxy resin, with the slow hardener. Very clear, no blush. You could use the medium hardener, but you'd probably need to wash the blush off between coats, and also prior to varnishing. The slow hardener doesn't blush at all. Randy...

I sanded mine down to the wood, and then gave two coats of clear epoxy before finishing off with a couple coats of marine spar varnish. The epoxy was the stuff cedar strip boat builders use, i'ts thin and very clear. The reason for using it first is it's very,very hard (it will stand up to the...

Tag, How do you know what size to buy? I checked the shorties out at Costco.com but I couldn't find any explanation of what size the sizes are (does that make sense?).

Wow! Although Neil Pryde sails are roughly half the price of sails from SunfishDirect.com, I notice that the weight of the material is very different. SunfishDirect uses 6 oz Dacron, while Neil Pryde uses 3.8 oz Polyester. I assume the 6 oz Dacron is better on many levels, but is it worth...

Hey, good luck! I'm on the same schedule as you, doing the same kinds of things. I'm hoping to sail Sunday for the first time EVER!

I just bought a used boat trailer to haul my "new" sunfish around. The trailer has 4' bunks located on the back end of the trailer between the wheels, and a roller farther forward on the tongue. Boat trailer bunks are straight, and parralel to each other, while sunfishes have a curved chine...

I've always wondered why there was a space between the bailer and the bottom of the hull. You mean that's a sailing rule? What is the rationale behind that?

I've heard the same thing, and the reasoning is that wax is hydrophobic (I think that's the term, it repels water). There is a product out there that does just the opposite, that is, it attracts and holds a thin film of water on the hull, so you have the water film attached to the hull sliding...

Sounds like glaze is basically the same as polishing compound.

What is glaze, and what kind of wax should you use? Car wax? Liquid or paste?