Search results

  1. Alan S. Glos

    NEW YORK Sunfish Rudder Assemblies and Dagger Boards For Sale

    Sunfish Rudder Assemblies and Dagger Boards for Sale Sunfish rudders and dagger boards for sale. All have been refurbished and refinished with three coats of marine gloss spar varnish. Hardware has been reconditioned and burnished to like new condition. Blades are all mahogany; tillers are...
  2. Alan S. Glos

    Recycling Sunfish Parts and Gear

    Readers of this Forum know that I often find, refurbish and sell used Sunfish parts and gear, and along the way I often come across items that are abused or damaged to the point that they cannot be made boat worthy again. So each year I end up with a few mahogany daggereboards, rudders etc...
  3. Alan S. Glos

    One piece Super Sunfish Mast?

    This week a fellow Sunfish racer friend gave me what he thought was a vintage Super Sunfish mast and boom that he had inherited from his father. It all looked legit but the mast was a tapered one-piece affair. I have owned one Super Sunfish and the mast that came with it was a three-piece rig...
  4. Alan S. Glos

    NEW YORK Super Sailfish Mark II Spar Sets For Sale

    I have two nice Super Saillfish Mark II spar sets (mast with mast head halyard block, upper boom, lower boom with Wilcox-Crittenden mainsheet blocks, gooseneck and all end-caps and connecting hardware.) These are freshwater spars in good to very good condition. These spars are for a 75 sq. ft...
  5. Alan S. Glos

    What's wrong with picture?

    This photo was off a local CraigsList ad. What's wrong with it? Alan Glos
  6. Alan S. Glos

    What boat does this rudder go to?

    A friend gave me this aluminum rudder assembly. He thought it came off one on the Snark family of boats. Anybody know for sure? It would make a nice sailing canoe rudder. Anybody want it? Alan Glos Cazenovia, NY
  7. Alan S. Glos

    NEW YORK Super Porpoise Spar Set for Sale

    I have a complete set of aluminum spars (mast, upper boom, lower boom with blocks and gooseneck) and all end caps and connecting hardware salvaged off a damaged beyond repair SP huil. Fresh water only, straight, and in very good condition. $195 for the set. Pick-up only in Cazenovia,NY near...
  8. Alan S. Glos

    Old dog, new tricks

    I have been varnishing boat gear (rudders, tillers, daggerboards etc.) for the better part of 60 years, and the drill had always been the same: sand, shape, repair dings, and hand varnish with either a bristle or foam brush, then fine sand/steelwool and re-coat x 3 or 4. This year I had an...
  9. Alan S. Glos

    Old Sailfish Demo Job - Not for the Faint of Heart

    This weekend, I bought a 1960s era fiberglass Super Sailfish as a parts boat. When I went to pick it up, two of us could barely drag the hull on my Trailex trailer. The hull had multiple holes and cracks, and weighed on the order of over 300 lbs. I was able to salvage a good rudder/tiller...
  10. Alan S. Glos

    Spring Sunfish Sail Sale

    I have three used Sunfish recreational sails for sale. All three are freshwater use only. Compare to $300 + for comparable Class legal sails: Blue and Yellow. A North, Class legal. Came off a 2004 Sunfish. It is in overall very good condition with excellent aerodynamic shape. When I...
  11. Alan S. Glos

    NEW YORK Vintage Laser Parts for Sale

    I just salvaged an mid-1970s (best guess) Laser hull that was damaged beyond repair and have the following parts for sale: -A pair of nice wood cockpit grab rails. Mahogany with stainless steel attachment screws. Good shape but need varnish. Just the thing for a purist restor. project or...
  12. Alan S. Glos

    NEW YORK Sunfish Parts, Gear and Hardware For Sale

    Sunfish and Sailfish Parts, Gear and Hardware for sale. Mostly used but some new, old stock. Vintage, pre-1972 hardware available. If you are restoring or upgrading a Sunfish or Sailfish and need hardware or hard to find parts, I have most of them at decent prices. Rudders, daggerboards...
  13. Alan S. Glos

    NEW YORK Sunfish Coaming (Splashrail) For Sale

    I have a used Sunfish coaming (splashrail) for sale at $40 + shipping or you pick up in Cazenovia, NY. It is in overall good condition, white but easily painted to any other desired color with a plastic friendly can of spray paint. Can be easily installed with pop rivets or your existing deck...
  14. Alan S. Glos

    Rudder angle change

    It looks like the Sunfish Class (subject to approval by World Sailing) will approve a change in the class specs to allow the rudder blade to be more vertical. I think this is good change. I hear that this change will improve control in heavier air, especially downwind. It also looks like an...
  15. Alan S. Glos

    Age of Intensity Sunfish Sail

    OK, here's your chance to nerd out on some Sunfish trivia. I just purchased a brand new, still in the bag, all white race cut Intensity Sunfish sail from a guy who was selling a bunch of Sunfish parts and gear. It has a window and a nice, full size, black Sunfish logo, and I know that...
  16. Alan S. Glos

    Racing Watch Recommendation

    My trusty old Ronstan Clear Start racing countdown wristwatch finally died (leaked actually). I bought another Ronstan Clear Start but (a) it didn't work and (b) the instructions didn't match the watch and it was impossible to program (APSltd graciously allowed me to return it for a full...
  17. Alan S. Glos

    Old Sailfish/Sunfish Rudder Blade Question

    OK, here is a chance for Sunfish Forum readers to nerd-out on Sailfish/Sunfish trivia: The first wood Sailfish and Sunfish rudder blades were low aspect, almost rectangular "elephant ear" shapes. I have bought/sold/and gifted several of them in my 20+ years of messing about in this market...
  18. Alan S. Glos

    NEW YORK Ronstan Clear Start Watch

    Does anybody have a Ronstan Clear Start racing stop watch they want to sell? Mine died and I don't like the new Ronstan watch - too complicated. E-mail me at: aglos@colgat.edu. Alan Glos Cazenovia, NY
  19. Alan S. Glos

    DePersia Screw-in cockpit bailer caps

    Wanted: Several DePersia screw-in cockpit bailer caps. Payment based on condition. Interested in buying up to ten. Got one or several you want to sell? E-mail me at: aglos@colgate.edu Alan Glos Cazenovia, NY
  20. Alan S. Glos

    Uploading photos question

    Question: Recently when I try to upload a photo to the Sunfish Forum, I get an error message that says the file is too large for the server to process. Oddly some of these same photos have loaded fine in the past. Has anybody else had the same problem and if so, is there a fix? Is there a...
Top