Search results

  1. cookwithgas

    Carpet on daggerboard trunk

    Keep it simple. Hook a bungee on the cleat for the halyard in front of the splash guard back to the daggerboard. You can either drill a hole in the daggerboard or put an eyelet. When you lift it, the daggerboard is pulled forward and wedged in place where you leave it. The green bungees at...
  2. cookwithgas

    daggerboard up or down...

    Here is what I do - When the water is shallow, I pull it up enough to clear the bottom or I will come to an abrupt stop. When going straight down wind, I pull it up to go a little faster. Otherwise I keep it down all the way.
  3. cookwithgas

    Home-made Sunfish Dolly

    Today I made a short video retrieving my Sunfish from the beach. The sand really requires the fat, soft tires. I tried it with some skinny harbor freight wheels and they got bogged down in the sand.
  4. cookwithgas

    Maximum wind to take out a Sunfish for average Sunfish sailor? "safely on ocean"

    I took my sunfish out on Pensacola Beach a few days ago and the wind was light and the waves were small. Even in these conditions the launch is no cakewalk. The key is to keep the boat pointed into the waves and get the centerboard down as soon as possible. Thanks to Signal Charlie for the...
  5. cookwithgas

    PRACTICE beats PANIC!!

    Good Point Zrtsixx. In the words of Capt'n Ron "The best way to find out Kitty is to get her out on the ocean. If anything is going to happen , it's going to happen out there!"
  6. cookwithgas

    Home-made Sunfish Dolly

    I took some more pics with the tape measure. I really am happy with this design. If you are worried about the stresses on your boat then maybe your boat is too weak to take on the water. There's no way this could damage any of my sunfish. The parts are made from 2X4 cedar. Enjoy.....
  7. cookwithgas

    Jersey Shore Sunfish Sailing

    A little too far for me, but good luck! Is the water a little cold up there right now? BRRRRRR. :eek:
  8. cookwithgas

    Mardi Gras Sail

    Our subdivision has a boat parade every Mardi gras and I joined in on my sunfish last weekend. Here's a short video: Enjoy.
  9. cookwithgas

    '84 AMF Sunfish with bad deck

    Pressure wash everything, then decide on your repair options. I drug one home that looked similar to that a few years ago and now it is my number three sunfish. It is ship shape and most of the mold came right off. Enjoy!
  10. cookwithgas

    Inside 60s Sunfish vs AMFlite

    Leaving just one port is smart - the fewer the better. I have three sunfish and only one of them has ports. Over the years the ports will deteriorate and tend to leak. One other suggestion - When cutting round holes use a fly cutter. It is a device that is adjustable you can use on your drill...
  11. cookwithgas

    '84 AMF Sunfish with bad deck

    If you are up to it, you can find all the information you need here: http://kb.sunfishforum.com/images/Flotation_Blocks.pdf
  12. cookwithgas

    Home-made Sunfish Dolly

    I snapped a photo of my new, improved sunfish dolly. The first dolly was made from some hard rubber wheels I got from Harbor Freight and they didn't work very well in sand. The short axles didn't work very well either. I ordered a wheel and axle kit from "wheeleez.com" which solved the sand...
  13. cookwithgas

    Sunfish Pickin Perdido Beach AL

    Hey I saw that one on Craigslist! Good find! Good luck with the restoration.
  14. cookwithgas

    Sailboat pajama pants FTW!

    That was years ago and it was my first sunfish. It came like that. I have since replaced the sail and adopted two more sunfish. I've replaced all of the important parts on two of them but the third one needs a few parts. Pat - That photo was taken at the end of my street in Omaha and was...
  15. cookwithgas

    Sailboat pajama pants FTW!

    That was a long time ago. I have since perfected the Sunfish dolly situation. I threw away the cart. I built a simple little two-wheeled thing that slides up in the daggerboard hole from the bottom. I have a few pictures of the "Version 1.0" but I have since added some fat wheels. I...
  16. cookwithgas

    Sailboat pajama pants FTW!

    Hey - you are in Nebraska. I bought my first Sunfish there (in Omaha). I sailed it every day in the summer in a little lake in our West Omaha subdivision and that's where I learned to love the Sunfish sailboat. I have three of them now and live on the water in a warm climate so I can sail year...
  17. cookwithgas

    Sailboat pajama pants FTW!

    Those are fantastic! I want some. Just don't wear them to the airport on your next vacation. Please! :)
Top