Search results

  1. Alcort59224

    Need Help Identifying Handgrips On Old Style Boat

    Kent, I noticed in your Facebook photo album that you have a aluminum (not plastic) new style rudder cheek that is black. Is it just painted? or some other type of coating? and how does it hold up? I've been thinking about painting mine black as I like the look much better but have reservations...
  2. Alcort59224

    Replacing A Sail (several Questions)

    I am considering replacing the sail on my 84’ Sunfish and am looking for opinions. I sail recreationally and am not concerned with being “class legal”. That said I am not interested in spending $300+ for an official sail. I am considering Neil Pryde sails , FX sails, Kevane sails, APS...
  3. Alcort59224

    Photos: YOU & YOUR Sunfish, in water, under sail

    That was a good sailing day last spring!
  4. Alcort59224

    Helmsman brand varnish

    I used Helmsman on my Sunfish rudder and dagger board last spring and after one summer of use it has started to peel and chip in places. It didn't really hold up well on the boards at all and I'm going to re-do them this spring with a good marine varnish. I wouldn't recommend Helmsman for...
  5. Alcort59224

    Deck attachments

    I strongly recommend that you do not use 3m 5200. 5200 is such a strong adhesive you will never be able to get the handle off in the future if you need to (if it breaks ect...), If you try to remove it when its held on by 5200 you will do damage to the deck, The screws should be what holds on...
  6. Alcort59224

    trailer

    Thanks to everyone for the advice, I think I'm just going to keep looking though and hopefully find one.
  7. Alcort59224

    trailer

    I'm looking for a small trailer for my sunfish. My only real requirement other than being suitable for a sunfish is that it has to be cheap. I'm a high school student and I really don't have much to spend at all. There's really no way I can afford a new trailer and I haven't found anything on...
  8. Alcort59224

    Re-attaching the foam

    I made a similar repair in one of my sunfish. The block on the port side of the bow was loose. I cut a 5" inspection port between the splash rail and daggerboard trunk (a 6" port would have made it eaiser). To rescure the block I first ripped out as much of the old evpanding foam as i could...
  9. Alcort59224

    Just got a sunfish

    The Super Sunfish was an option offered for a few years (late 70's or 80's not sure exactly when). It had a rig similar to a laser and a few extra deck cleats and a traveler in the cockpit. The Super Sunfish is faster than a regular sunfish with a lateen sail.
  10. Alcort59224

    I have a sunfish now what

    The extra cleats on the coaming an in the cockpit of the blue boat are for super sunfish riging. I would assume the extra mast thatyou thought was an upgrade is the super sunfish rig. A super sunfish has a rig similar to a laser instead of a lateen sail.
  11. Alcort59224

    life vests

    The comfortable life vest is not wearing one at all.---------NOT RECOMENDED
  12. Alcort59224

    New Life for SCUD (1968 Sunfish)

    "I also noticed a hole I need to patch. Can you see it between the two inspection ports up high? I think I'll just put a patch on the other side." The hole between the two ports is suposed to be there. Im not sure whats its called but it acts like a vent hole. Think about it if the boat were...
  13. Alcort59224

    Progress Update

    Nice job on the restoration and I think the red deck looks really nice. -Eric
  14. Alcort59224

    Righting Sunfish

    I weigh 140 pounds and have no problem righting my sunfish which is a little overweight. I think that the little bit of extra weight from water in the mast would be insignificant and have no effect. I would guess your problem was that the mainsheet was caught on something and you didnt notice...
  15. Alcort59224

    gooseneck-boom placement

    For a recreational sailor set it about 18 or 20 inches from the front of the boom and leave it. I use a quickrelease on mine so I can adjust it according to wind conditions. Putting the gooseneck futher foward on the boom gives you more power for lighter winds and further back depowers the rig...
  16. Alcort59224

    Mast Ring (attached to lower boom)

    The "ring" should be tight on the lower boom. On older boats the goseneck was threded for a bolt to screw in and tighten it. On newer boats the goseneck is not threded and a small bolt and locknut is used.
  17. Alcort59224

    What should I expect to pay?

    I bought a 69' last summer in mint condition with no trailer for $500, so $800 for a boat in good shape on a trailer sounds reasonable.
  18. Alcort59224

    New Life for SCUD (1968 Sunfish)

    "The old style rudder system is a horror show" I have 2 sunfish one with the old stylerudder and one with the new and dissagree with everyones claims that the old style is so bad. On my 69' sunfish with the old style rudder I have slightly modifyed the system to eliminate the problem of poping...
  19. Alcort59224

    determine Sunfish age?

    "Anybody notice anything missing for a boat that's undergone a rudder upgrade?" Are you talking about the inspection port? I assume that a hole was cut for the job and then patched with fiberglass, the patch job isnt visible through the green paint on the deck.
  20. Alcort59224

    determine Sunfish age?

    The open space above the rudder bracket is where the old style bronze rudder deck plate was removed when the boat was converted to the new style rudder. As long as the deck hull joint is good it shouldent leak there, but a leak test is the only way to know for sure. -Eric
Top