Hi all.
I've been offered a radial sail, which had a really strange metal bracket with it.... The sail is open at the top of the luff tube (no webbing at the top), and it looks like the bracket is there to fit over the top of the mast, then you're supposed to tie the top of the sail to it.
I'm...
In short, yes. I'm not 100% sure about the correct size to use, but I'd probably be aiming for 1.5"-2" number 10s for that job. There are others on this forum better qualified to comment on that one.
Don't forget to suirt some silicone sealant into the screw hole before you attach the cleats!
That's a great idea - devastatingly simple, and I've not idea why I didn't think of it already! Cheers.
Quite how one swaps from one Laser to another is another issue...?
I mean flatter; and my weight is usually pretty well forward when racing upwind.
Hi all.
I've recently been doing some race training with a couple of different trainers / good Laser sailors. The training was Laser to Laser on the water, and they both separately identified that I can't / don't point 'high enough' when sailing upwind (but my downwind speed is good).
My...
Chinagraph pencil for me - also known as 'Mars Marker'. I write the couse on the smooth deck next to the centreboard. It is robust enough to stay put until you want to rub it off.
I've re-arranged the lines in the fairlead, attempting to 'jam' the fixed end into my problem gap... It didn't exactly jam in the gap, but it is now between the moving line and the problem gap, and worked ok for the duration of the wednesday evening race. Hopefully, that will be my problem...
Now this is an area I'm an expert in!
You don't say in your original post... when you were having a hard time getting the boat up, were you basically in the water or on the centreboard?
Obviously, attempt to keep your capsize 'dry' if you can, by hopping over the side of the hull onto the...
Ok Alan. I guess that makes it pretty clear... Many thanks for your input.
I'll try adjusting the line so the fixed end fills the gap (although my gut feeling is that it won't work). Beyond that, I guess I'm looking to replace the line with something thicker.
Unless anyone else has any...
Hi Ian
Your arrangement sounds the same as mine.
That suggestion certainly sounds like a possible solution, and low on hassle! It may not work for me because the line was pre-spliced when I got it, so might not work where the slpice makes the line thicker. However, I'll certainly give it a...
So... I can't attach a block to the fairlead, as the purpose would be to eliminate the moving line through the fairlead, a clear rule breach.
A fairlead with a metal insert ring doesn't appear to be allowed by the rules.
My problem still exists... and I'm not supposed to sand the fairlead...
Oops! - I didn't mean to cause issues for anyone!
So, Alan; I've just been reading the rule book from the link you so kindly provide at the bottom of your posts... Am I reading it correctly that it is fine to attach a block to the fairlead at the end of the boom? I currently have:
The Harken...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.