Recent content by mtoms

  1. M

    Hull Separation Repair

    Since 2005, 150 problem-free used Lasers sold. I stand by my work, as described above. The reason Gorilla glue works, when applied as above, is that, unlike epoxy or resin, it expands to fill the voids, which avoids the inevitable air pockets the epoxy/resin method leaves. Yes, you can...
  2. M

    Hull Separation Repair

    And after looking at your pics num 2 & 3, you may need to do some fiberglass buildup on the hull portion in that section, so there is something for the deck to bond to.
  3. M

    Hull Separation Repair

    Through trial and error working on many boats over the years, here is what I found works best for this repair: 1) No material needs to be removed - any removed material decreases the likelihood that you will get an effective bond. It looks like you already have the boat inside. Keep it inside...
  4. M

    Laser repair suggestions (split sandwich)?

    dave_one Through trial and error working on many boats over the years, here is what I found works best for this repair: 1) No material needs to be removed - any removed material decreases the likelihood that you will get an effective bond. It looks like you already have the boat inside. Keep it...
  5. M

    Bill I am interested in your Laser 2 spinnaker and lines. I do not need the pole. Based on new...

    Bill I am interested in your Laser 2 spinnaker and lines. I do not need the pole. Based on new ones selling for $215 at Intensitysails.com , my offer is $75 for the sail and lines. No offense if that does not work for you - or feel free to counter-offer. Thanks, Mike Toms [email protected] cell...
  6. M

    Hello - sent you an email, re:your post on this site about my 2005 Laser in VA, to...

    Hello - sent you an email, re:your post on this site about my 2005 Laser in VA, to [email protected]. Let me know if you got it or not, and correct email, if you did get it.

Back
Top