Recent content by jotag

  1. jotag

    Rivets to attach gooseneck to lower mast section

    I would redrill gooseneck and tube to 6mm and put a 6x14mm rivet. You surely have the aluminium holes enlarged from the original size 5mm ( 3/16")
  2. jotag

    420 C sail

    Thank. I wanted to know about sails because we sell dollies of all dinghies classes and customers frequently ask for 420 sails and we are only familiar with 420I.
  3. jotag

    420 C sail

    Excelent. You are an expert. It is more than I wanted to know. Thank you.
  4. jotag

    420 C sail

    Thank you. The difference is only in the weight ot different cut also?
  5. jotag

    420 C sail

    Could someone tell me if there are any difference in the sails 420C and International class??. Thank you
  6. jotag

    Jotag Dolly bow rest

    You surely have an old model dolly. We have changed the bow support years ago. Please see our website www.jotagsa.com
  7. jotag

    Jotag Dolly bow rest

    I do not know why you take the rubber off. If so, you should have to make a little rubber to reinstall it. Anyway in new model it was just modified making it easier despite you no need to take it off for years.
  8. jotag

    Trailering laser on dolly on trailer

    Ask for a quote in our site. Have in mind they fit only in our dollies. For another ones you should have to adapt them.
  9. jotag

    Trailering laser on dolly on trailer

    I traveled thousand of miles with my boat on the gunwale supports of Jotag dolly without any problem. They are made of aluminium, non plastic and rubber.
  10. jotag

    Dollies: Jotag versus Dynamic ...

    Signal charlie is a very good salesman. I humbly recommend our dollies. Try them, there are 3000 sold in usa. You will not regret . Gunwale support are sold separately and does not fit sunfish dollies
  11. jotag

    Argentina "Training" Laser

    Last year we have registered our mark JOTAG in USA.
  12. jotag

    Argentina "Training" Laser

    Alex: we manufacture dollies and practice laser spars in Argentina and export them to USA from 2008. I do not know if there are import duties in Mercosur. If it is of you interest please contact us. www.jotagsa.com
  13. jotag

    Hi Monkey_feet: I am answering this 4 years later!!!. Sorry. We manufacture our dollies in...

    Hi Monkey_feet: I am answering this 4 years later!!!. Sorry. We manufacture our dollies in Argentina and export them to USA. We have been delivering dollies, laser and opti spars from our warehouse in Miami to all states and worldwide since 2008. JOTAG is a trademark in USA. Thank you
  14. jotag

    Sunfish Mast and Boom Specs

    Thanks again Roller. I would like to test hardness of any good spars in order to realize about alloy type. But here in Argentina there is no sunfish boats. I have 35 years of experience in heat treatmets and before getting involved in spars matter I had believed that better alloy meant better...
  15. jotag

    Sunfish Mast and Boom Specs

    Thanks Roller. We manufacture dollies for dinghies and laser practice spars with this alloy and we are analizing to begin with sunfish class. But I believe to remember that in any place I read that the mast goes with 6061T6 but the booms in 6063T6 or 5. I would like to use the right alloy and we...
Top