Search results

  1. P

    J24 Foreguy Fairlead Bullseye

    The Harken bullseye fairlead, attached to a stainless plate, that is bolted to the deck aft of the forward hatch cracked and failed. The harken bullseye looks to be standard, but it appears to be riveted in place with a solid rivet. Anyone have a good way to attach a new one to the same plate...
  2. P

    Raymarine Depth Sounder question

    Sorry for the poor quality shot and the winter dirt in the boat. You can see the position of the AIRMAR P79 as compared to the mast plate and the old transducer.
  3. P

    Is My Keel Going To Fall Off!!!

    for the keel bolts there is a good write up in sailing anarchy J boat discussion forum. Just did mine on an inherited 1981. Takes about a day. There was a lot of loose wet filler under the glass in the aft sump.
  4. P

    Keel Sump - What do I need to do here?

    there is a good write up on sailing anarchy discussions of J boats. It shows how to rebuild the aft sump. Takes about a day.
  5. P

    Raymarine Depth Sounder question

    I managed to get a fair signal to a ST60+ and a P79 transducer mounted in the hull just forward and to port of where the battery is mounted at the base of the mast. Trial and error for a signal through the hull. i can't say it is perfectly accurate but better than a hole in the hull. I put...
  6. P

    Slow or fast?

    Slow or fast? Fixing keel sump with soggy Verm on late 2900 series boat. Directions from experts say use slow hardener. But not is fall and I am finally in the repair mode. Can I use thickened fast hardener epoxy with Penske board vice slow hardener when the temps are near 60?
  7. P

    J24 Keel bolt frozen

    I recently purchased a 1981 J24 at auction (cheap). Small cracks in the paint around the aft section of the keel and separation of the filler from the inside sump wall around the aft two bolts likely mean I have to remove the filler and redo the sump around the aft two bolts? The aft two nuts...

Back
Top