Search results

  1. 4thbnnjvolCurassier

    Centerboard dropping while launching or trailering (solution)

    I replaced the bottom gasket on my Mod 1 last summer. It was the original from the ' 80's so I found that most of the screws holding the hard plastic bracket were rusted and stuck very hard in place. Use WD-40 or something like that a day or so before attempting to get those screws out if your...
  2. 4thbnnjvolCurassier

    Centerboard dropping while launching or trailering (solution)

    I did pretty much the same thing for the same problem. I drilled a 3/8 inch hole at the highest lift of the centerboard even with the deck and used a prong from an old manure fork (common plastic fork in a horse barn), which is tappered. I shove the prong through the hole wedging it in tight...
  3. 4thbnnjvolCurassier

    Capri 14.2 Mod 1 on E-bay

    Don't know where that silly icon came from - saw the sale at 4 pm.
  4. 4thbnnjvolCurassier

    Capri 14.2 Mod 1 on E-bay

    Just puting this out there. There is a Capri 14.2 model 1 for sale on E-bay right now for anyone in or near Illinois who might be interested. Current bid at 16:oo 9/23/16 is $250.oo. Auction ends in 48 hours. Comes with all gear, rigging, boom, mast, shrouds, etc with trailer. Looks like...
  5. 4thbnnjvolCurassier

    need tiller

    You might want to get a Baby Bob mast float so that you will never capsize again. With the float the boat will only stand on it's side. Go to page two of the Capri 14.2 forum and scroll down to "Expo 14.2 turtling" On that page I have sent complete instructions of one way to attach it to the...
  6. 4thbnnjvolCurassier

    need tiller

    Looking at the parts list, I would think that you would have to get the kick up head and other metal parts from them, but $120 - $130 for a tiller and extension sounds a little rediculous. A simple 2x2 from Lowe's would cost, what, $5? Round out the shaft with a knife and sanding (or a friend...
  7. 4thbnnjvolCurassier

    need tiller

    Catalina Direct: Rudder Hardware You will find everything you need here.
  8. 4thbnnjvolCurassier

    Just bought a used '85... need manual or rigging pics

    Tim, scroll down on pages 1 and 2 of this forum and you will find a lot of info posted to questions about re-fitting a Capri, restoring an older 14.2, and lots of other tips on the best mounting and motor to have on board. An oar on board isn't going to do you much good, however, I suppose it...
  9. 4thbnnjvolCurassier

    Charlotte NC area

    Bob, Thank you for your note. I am sorry to have delayed a response. I only saw your message this morning as I was thinking that since the weather was getting so nice perhaps there are new threads coming up on this site. I still have some minor jobs to finish on my boat before getting it into...
  10. 4thbnnjvolCurassier

    A new Capri 14.2 owner

    Guys, I have been meaning to write and mention that Anthony received the photo's and plans for my gig to attach the Baby Bob to a Capri 14.2 mast, and that they have been posted. They are posted, however, in the "Expo Turtling" thread in this forum. I would like your opinions on my idea...
  11. 4thbnnjvolCurassier

    Expo 14.2 turtling

    I have photo's and instructions for attaching a Baby Bob to the Catalina masts with clean lines and very little trouble. Other methods have been posted in the past but this design does not have a metal bracket being bolted to the mast head and setting the float off-center. I am not able to post...
  12. 4thbnnjvolCurassier

    Expo 14.2

    wow posted the last to the wrong thread
  13. 4thbnnjvolCurassier

    Expo 14.2

    I have photo's and instructions for attaching a Baby Bob to the Catalina masts with clean lines and very little trouble. Other methods have been posted in the past but this design does not have a metal bracket being bolted to the mast head and setting the float off-center. I am not able to...
  14. 4thbnnjvolCurassier

    A new Capri 14.2 owner

    Anthony, Thank you for posting the detailed pictures of your boat. I just got this one in Oct. and it is my first sailboat. 1985 Catalina Capri 14.2 sailboat for sale in Virginia I liked seeing that the newer models have not changed that much from my older one. I was wondering if...
  15. 4thbnnjvolCurassier

    Small outboard motors on Capri 14.2

    I have ordered the power center and the same battery. I always have a full charge in my phone when going out anywhere and also have a phone charger to use in my Ram. However, it's nice to know that I could use the power center for that too. I have had all the bells and whistles disconnected...
  16. 4thbnnjvolCurassier

    Small outboard motors on Capri 14.2

    Just also noticed that we have the same color scheme main sails. My old girl is number 575.
  17. 4thbnnjvolCurassier

    Small outboard motors on Capri 14.2

    Ah, hit wrong button. I was going to add that I note you are in Hampton VA. I wanted to mention that my wife and I are avid visitors to Williamsburg, Yorktown, and Jamestown. We have done many living history events at all three over the years. Also, I purchased my boat in October from a man...
  18. 4thbnnjvolCurassier

    Small outboard motors on Capri 14.2

    Thank you for your input Pirate (I'm assuming that Tammy is Scooter). Your pictures look great. I noticed that you joined this forum on the Marine Corps Birthday Oooh Rahhh Your pictures look great. You are obviously more experienced with sailing than I am, being completely new and waiting...
  19. 4thbnnjvolCurassier

    Thanksgiving Plans?

    Sailing in November, wow! I'll be putting the warm blankets on the horses, shoveling you know what, and thinking about warm water in the Spring.
  20. 4thbnnjvolCurassier

    Ouch, my aching buns

    I bought one of these for use in my Sabot. I had thought about cushions when I first saw the seats in my Capri. I guess I will get another one for my wife before we take it out for the first time next Spring. They float too. Coleman Stadium Chair - Walmart.com Tom

Back
Top