Search results

  1. D

    Part came out

    I tried to put the eye strap back with gorilla but for some reason it wouldn’t fit back into the two holes. The hikes were to close together which makes no sense because it came out of those holes.
  2. D

    Part came out

    I probably couldn’t put a shock cord in. I’m not very handy. Unless it’s something super simple that doesn’t need drilling into the boat.
  3. D

    Part came out

    I’m not sure. I bought it used.
  4. D

    Part came out

    I don’t think there’s wood
  5. D

    Part came out

    The dagger board is wood
  6. D

    Part came out

    The piece that you tie the string in the dagger board to came out. How do I put it back in?
  7. D

    Righting a sunfish

    Dumb question but what did they use to tie the milk jugs to the mast?
  8. D

    Righting a sunfish

    There may be water stuck in my mast. Several people recommended that I drill a hole in the bottom cap to let the water drain but water didn’t come out. I can hear some in it when I move it back and forth- but it doesn’t sound like much.
  9. D

    Righting a sunfish

    If I bought a mast top flotation It wouldn’t be in the way of the sail coming about or the if I mounted a floatation device on top of my mast it wouldn’t be in the way of the sail or the halyard?
  10. D

    Righting a sunfish

    They are at the very outside end Of each spar. They worked on my mini fish but not on my sunfish. It turtles so quickly I don’t always have time to swim around.
  11. D

    Righting a sunfish

    I bought 2 floats that are basically noodles with Velcro straps and put one in the top spar and one on the lower and my boat still turtles.
  12. D

    Righting a sunfish

    I don’t think that would work with a sunfish. I would need something on the spars. Right?
  13. D

    Righting a sunfish

    It’s a sunfish. The float has to go on the spars. I can’t find anything.
  14. D

    Righting a sunfish

    I bought anti turtle floats that are basically foam noodles and put them on the ends of both spars and my boat still turns upside down. I don’t know what else I can do.
  15. D

    Sunfish trailer

    Are there trailers for Sunfish that you can pull behind your car and then back the trailer into the water to launch the boat? I can’t lift the boat at all so I would need to float in off and onto the trailer.
  16. D

    Removing the end cap from the mast

    I am not sure how to get the pins in or out to remove the end caps. I used a wet vac and there is a small amount of water still in there. Will that damage the mast with freezing?
  17. D

    Removing the end cap from the mast

    I did try a wet vacuum. It sounds like there is less water in there now. Just a bit which I’m hoping will be ok.
  18. D

    Removing the end cap from the mast

    I drilled the hole larger and the drill bit was filled with cork so that is what is obstructing the water. I’m still not confident that I can get the pins out or back in if I attempt to remove the end cap. Will it damage the mast to leave the water in?
  19. D

    Removing the end cap from the mast

    I don’t understand where to drill the second hole
  20. D

    Removing the end cap from the mast

    I drilled the hole but the water didn’t come out. Not even a drop.

Back
Top