The hull number is the last 4 digits of the VIN . Mine is molded into the upper right hand corner of the outside of the transom, as well stamped into the metal Catalina ID plate which is screwed onto the inside of the transom, and inscribed into the fiberglass with a vibrating pencil on the...
deck cleats
I tried to attach a pic of my rear cleats installation to my original reply on the deck cleats but it won't take it as the pic already appears in another thread called "hiking strap replacements". In my brief experience sailing the boat this season with the cleats mounted outboard...
cleats
I was going to mount a folding or retractable cleat on the front deck , but haven't gotten around to it yet. I did mount 6 inch white plastic cleats to the outside of the rear corners for the dock lines. They haven't snagged any lines yet so I guess you can say they are working OK.
C-14 decal
Hi, I believe that you helped me with my ladder and engine mount suggestions. I was trying to come up with a new boat name decal before I launched my (new to me) 1988 Mod 1 , so I was searching around the web for decal manufacturers when I located this company ([email protected]...
I recently posted a picture of my '88 boat and someone asked me to post pics of some of my improvements . I already wrote elsewhere that I incorporated many of the suggestions that were contributed by other folks: Boom Kicker, engine mount, ladder hatch cover, centerboard lift, etc. Some of...
trailer
Yes, the fenders are 1/8 steel plate material, and the way they are mounted you can definitely stand on them. I am 200 pounds, and they don't deflect at all. This trailer is at least 20 years old, built out of solid steel, the old fashion way! Someone had already replaced the tires on...
hiking straps
I just replaced all 3 straps. The part for the hiking straps is #15166-$111.51 you have the option of red or blue. This also included the three wooden dowels that help to make the straps somewhat adjustable. THere is a stainless 90 degree angle plate on the inside of the...
trailer choice
This is only my opinion, but I find most of the small boat trailers that I see to be somewhat innadequate (or rather , minimally adequate ) for real towing purposes. Most of what I see is a are very lightweight, flimsy single steel "C" channel or square tube framed trailer...
trailer lights
Boat trailers are usually equipped with waterproof lights , not the normal utility trailer lights. Boat trailer lights are usually hollow on the bottom, but form an airtight bubble in the light housing when submerged (like an upside down cup) thus preventing the hot bulbs from...
hiking stick retainer
go to any Home Depot, Lowes, or hardware store. They sell metal or plastic C shaped retaining clips to hold brooms and mops to walls. You would probably have to screw it to the wood tiller handle with a small screw to be effective . Any marine store would sell the boating...
It was a long cold winter here in the North East so I had all winter to read all the historical posts on preparing my (new to me) 1988 Capri for the 2010 sailing season. Thanks to all who previously posted their improvements and recommendations, as I utilized all of them. Of particualr interest...
Hatch
I tried some of the big stores in the NYC area but couldn't locate a large enough piece of material based from a cutting board. I remembered a marine plastics store in Norwalk CT that sold the material (its called Starboard), and they cut me a piece of 1/2" thick for about $12. See...
boat cover
You don't have to use the mast itself. On my 23' power boat I use 10- ft sections of inexpensive 1 inch EMT tubing from Home Depot. They are coupled together to make a single 30 ft long single beam. I use 2 x4's as uprights ( A frames ) about - 5 ft under the EMT to keep it...
cover
you are gloing to spend a lot of money for a Sunbrella cover. I live in southern NY and cover mine with a 16 X 20 plastic cover that I got from Harbor Freight Tools. It is silver, easily twice the weight of the blue plastic cover. I use the boom as the center beam, and I made a mast...
sail slugs
I found it: from a July 2005 posting from VOMEGA:
I've also installed slugs and slides on the mainsail on 19" spacing. I used the shackles from Sail Brite that don't require grommets. The shackle hank snugs up against the bolt rope, which nicely distributes the stress. Avoiding...
sail slugs
I stumbled upon an old posting 2 days that recommended adding the sail slugs and a sail stop to ease the raising and storage of the sail on the boom. Now that I am looking for it I can not locate again. It recommended the 3 parts to order from Sailrite, which I did, 2 days ago. I...
In making an attempt to completely re-polish my 1988 Mod 1 hull, I scrapped off my old hull registration numbers and the two "Capri 14.2" decal. I thought I could just easily order a new set of decals from Catalina for the now newly polished hull. Low and behold the Catalina customer...
Hey, looks good. I might copy your design for the floorboards . When I got my Capri Mod 1 someone had already painted the floors and walls white. It really brightened things up. I didn't get a door on mine so I bought a piece of "Starboard" from a local plastics place for $12 and cut out a stiff...
I recently started sailing and decided to move up in size what what I had to a Capri 14.2. After searching for some time I found #1945 and bought it. I read many of the past threads that concerned turtling . I saw on Ebay a sail sleeve that contains floatation material that slips over the top...
rubber grommet
I was thinkng the same thing. I then decided to paint the entire interior of the cockpit and refresh the whole boat. My grommets simply popped out without much force. Looks lke they had some kind of sealant around the perimeter gluing them in place in addition to friction. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.