Recent content by Greg Morrissey

  1. Greg Morrissey

    How to dry a Laser hull

    but surely it would all of drained out of the cubitainers by now like i have had the boat in a shed since last september.
  2. Greg Morrissey

    How to dry a Laser hull

    So I just weighed my boat with the scales and I got 143lbs so it's 8lbs overweight and everyweek I still find 500ml of water in the hull.
  3. Greg Morrissey

    How to dry a Laser hull

    What's the best way to weigh a laser?
  4. Greg Morrissey

    How to dry a Laser hull

    but surely after all i did the moisture should be gone.
  5. Greg Morrissey

    How to dry a Laser hull

    I have had hairdryers inside the hull blowing warm air around it. I have put the vacuum cleaner inside it for about 4 hours. I left the inspection port open for most of the spring and I had small pots of salt inside the hull to absorb the moisture and last week I closed the inspection port and...
  6. Greg Morrissey

    Painting Laser Deck and Hull

    My boat was resprayed both deck and hull and i did not loose much of the non skid decks grip.
  7. Greg Morrissey

    Breather hole

  8. Greg Morrissey

    Breather hole

    The smallest drill bit I have is a 4mm or about 1/6" I presume it wouldn't make much difference I will probably be drilling the hole today
  9. Greg Morrissey

    Breather hole

    Was it easy to drill through the fiberglass and what diameter drill bit did you use
  10. Greg Morrissey

    Breather hole

    Well obviously I ment when you're not sailing
  11. Greg Morrissey

    Breather hole

    Did you drill a breather hole in it or just make sure u always remove the bung
  12. Greg Morrissey

    Breather hole

    How doesnt water get into the hull from this hole if you capsize or any water sloshing around in the cockpit. I always leave the bung out when on shore
  13. Greg Morrissey

    Breather hole

    I don't think that it has one under the mainsheet block either as I replaced that only a few months ago and don't remember any holes except the screw hole. Would it be safe to drill a hole in the boat for a breather hole?
  14. Greg Morrissey

    Breather hole

    It's the hole in the front of the cockpit which lets the air pressure stabilise inside the hull
  15. Greg Morrissey

    Breather hole

    My laser doesn't have a breather hole could it be any where else on the boat

Back
Top