Recent content by DA

  1. D

    Fixing cracks in the seats.

    Great photo Dave! I didn't even think of doing work from the inside, I'll have to see if I can fit in and clean up some of my sloppy glass work. Did you do any type of finish work inside your "cabin" for storage when you converted it? Do you have a vertical piece of plywood along the...
  2. D

    Parts for first generation 14.2

    Thanks for the photo Dave. I completed the job, but wasn't very diligent about takings pics (I was too covered in sealant and resin). To summarize the procedure, first I removed all of the horzontal wood, then cut the fiberglass out toward the front of the boat to make enough space to insert...
  3. D

    Parts for first generation 14.2

    OK, now it's getting interesting... The wood was not in very good shape at all. As a matter of fact, when I cut the fiberglass below it I was able to pull out the entire piece in chunks. Now I am looking for the best way to completely replace it. I am thinking of cutting a piece of 3/4" plywood...
  4. D

    Parts for first generation 14.2

    Thanks! I'll pick up some West Systems Epoxy and give it a go this weekend. I will try to get at it from underneath (I have a mod 2 and when I take out the cubby I can reach it fairly easily). So far I have reseated and sealed all the deck hardware, most is in good condition, only have to...
  5. D

    Parts for first generation 14.2

    Dave, In your lengthy description of upgrades you talked about restoring the wood under the mast step. I have a similar situation. Overall, the wood seems to be fairly sound, but there is evidence of leak and some soft wood along the edge. What type/brand of fiber filled epoxy did you use? Any...

Back
Top