I thought this new rudder rule 3.3.3 was approved by the class at the 2018 worlds? Surprised there are no pictures or instructions on how to make the change. Seems it would be very helpful to control weather helm.
Weighed the boat tonight..not sure how accurate..I turned the boat on its side and put two small pieces of wood on a scale covered with a towel and balanced the boat. It fluctuated between 125 and 128. Seems pretty good for a 13 yr old SF.
I have a 13 yr old worlds boat which I am going to weigh this weekend. The boat is in good shape but I am curious to know the weight. Does anyone know what a newer SF should weigh?
Buying new sail for first time in six years. Thought I read somewhere that the sail # size is different now. You no longer buy them from the class site but cannot find any info. Does anyone know the new sail # size?
Is there any marking on a racing sail which gives the age? No idea how old it is but it is no longer crisp and feels like it has stretched out over the years and my boat speed is just not the same anymore. Thinking of getting a new sail.
Raced for the first time this yr last weekend. After packing the boat up on Sunday I was stunned to see that the hull and sides had a light yellow stain over 50% of the boat! Any idea how to clean this and still keep the hull slick?
I did complete the refinish on the rudder blade. It looks good but the varnish finish does not leave a slick feel like the fiberglass blade. Is there a product to put over the dried varnish which will leave a slick feel other than spraying with McLube? McLube does leave a slick finish.
I still sail with the wooden rudder because I am to cheap to buy the new fiberglass blade. It is 11 yrs old and starting show wear. I keep it slick with McLube but the varnish has worn off the edges and it is down to the wood. What is the best way to refinish the blade and what product will give...
Just read that you can now use 2 halyards plus a Jens. Does anyone have some pictures of a 2 halyard setup? What would be the best method to attach the second halyard to form the Jens?
I still race with a 10 yr old wooden rudder because I am to cheap to buy one of the new fiberglass blades. I do OK in regattas and the blade is in decent shape. Is there a type of paint or graphite I can put on the blade to give it a good hard slick surface and still be class legal?
Last weekend I sailed in a regatta with winds 18-22..I weigh about 142..put in a large jens..moved halyard down almost two clips and had about 21" of mast exposed..this really helped me sail upwind with the 190lb guys but I noticed something strange on starboard tack. I could not point near as...
Thanks for the link..it does appear they use the purchase system aft of the boom block..one picture shows that he takes the outhaul tail around the mast and then back to the cockpit but another shows him taking it around the mast and then through the halyard fairlead and then back to the...
I have noticed that there are a few different ways to set up the outhaul. Some put a purchase aft of the block and then run the line forward around the gooseneck and back to the daggerboard..others set it up with the line going through the boom block and then put a purchase in front of the block...
Whenever someones posts a picture on this site all i see is a red x..I can see pictures on other sites and my internet options does allow to show pictures..any idea why i cannot see pictures when someone posts one in the body of their post?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.